Skip to main content
Knowledge-Pathway-Hero-image

Optimizing Process Workflow Through Layout Redesign

The Leica Biosystems Content and Evidence team has partnered with a private, non-profit, integrated health system to optimize their new laboratory layout to ensure efficient process flow. The laboratory is most interested in ensuring their new laboratory space is structured to best handle the initial volume while allowing for increased growth over the coming years. The new histology laboratory will include routine, special, and immunohistochemistry staining.

The Leica Biosystems Content and Evidence team was provided an initial architect drawing with planned equipment placement. The team conducted interviews with lab directors, and staff to obtain all necessary input on process requirements. The Leica Biosystems Content and Evidence team mapped the process flow and redesigned the layout to rearrange the placement of process steps and equipment. Below is the initial layout provided to the team and the recommended layout after adjustments.

Image
Optimizing Process Workflow Through Layout Redesign
Fig 1. Initial architect drawing from customer with mapped process flow
Image
Optimizing Process Workflow Through Layout Redesign
Fig 2. Recommended laboratory layout with mapped process flow

The new laboratory space included space for:

  • Separate room for 4 tissue processors and waste storage
  • 3 Embedding stations with room for 6 total stations
  • 8 Microtomy stations with room for 12 total stations
  • Dedicated island for routine staining
  • Dedicated island for special staining including hood for hand stains
  • Large area for Immunohistochemistry preparations and staining
  • Large workspace for Case Assembly and distribution of slides
  • Wall space for storage of blocks and slides
Image
Optimizing Process Workflow Through Layout Redesign

The estimated travel distance for the specimen of the initial drawing was 143.2 feet and included two crossover process steps. The recommended layout eliminated all crossover process steps and had an estimated travel distance for the specimen of only 79.9 feet. That is a 44.2% reduction in wasted travel distance. The Leica Biosystems Content and Evidence team was able to visually demonstrate the improvements using a spaghetti mapping process which resulted in the necessary gains.

Projections and Realized Results are specific to the institution where they were obtained and may not reflect the results achievable at other institutions.


Die Inhalte des Knowledge Pathway von Leica Biosystems unterliegen den Nutzungsbedingungen der Website von Leica Biosystems, die hier eingesehen werden können: Rechtlicher Hinweis. Der Inhalt, einschließlich der Webinare, Schulungspräsentationen und ähnlicher Materialien, soll allgemeine Informationen zu bestimmten Themen liefern, die für medizinische Fachkräfte von Interesse sind. Er soll explizit nicht der medizinischen, behördlichen oder rechtlichen Beratung dienen und kann diese auch nicht ersetzen. Die Ansichten und Meinungen, die in Inhalten Dritter zum Ausdruck gebracht werden, spiegeln die persönlichen Auffassungen der Sprecher/Autoren wider und decken sich nicht notwendigerweise mit denen von Leica Biosystems, seinen Mitarbeitern oder Vertretern. Jegliche in den Inhalten enthaltene Links, die auf Quellen oder Inhalte Dritter verweisen, werden lediglich aus Gründen Ihrer Annehmlichkeit zur Verfügung gestellt.

Vor dem Gebrauch sollten die Produktinformationen, Beilagen und Bedienungsanleitungen der jeweiligen Medikamente und Geräte konsultiert werden.

Copyright © 2024 Leica Biosystems division of Leica Microsystems, Inc. and its Leica Biosystems affiliates. All rights reserved. LEICA and the Leica Logo are registered trademarks of Leica Microsystems IR GmbH.